 |
| Quantity: | |
|---|---|
TP316/L
ISO, PED
DN8-DN450
woven bag or as per customer’s
FOB/CFR/CIF，etc
T/T, L/C or as negotiation
Size: OD:13.7-457.2mm
WT: 2.11--23.83mm
Length: 6M,12M,5-7Mrandom length,According to customer requirements
Process: Cold drawn,cold rolled
Package: Woven bags
End: PE / BE
Compressed air as the driving force, the use of high-speed sand flow (glass sand) impact cleaning and roughening of the substrate surface of the process, usually after the polishing process, but also in the pickling of steel pipe surface defects after remediation.
The purpose of sandblasting is to realize product surface cleaning and change the surface roughness.
The media needed for sandblasting is required to have a good cutting effect.
Annealed : Annealing is a heat treatment process in which the properties of a material are changed by heating and cooling. In stainless steel pipe manufacturing process, annealing is usually used to eliminate stress, improve mechanical properties and improve machinability. annealed means that the pipe has been annealed, its grain structure can be rearranged, so that it has better physical properties and machinability.
Pickled: Pickling is the process of exposing a metal surface to an acidic solution to remove surface oxides, rust spots and other contaminants. Pickling of stainless steel pipe can restore its surface finish, improve its corrosion resistance, and provide good surface conditions for subsequent processing and use.Pickled means that the pipe has been pickled, and its surface has been cleaned and removed oxides and other impurities.
Size: OD:13.7-457.2mm
WT: 2.11--23.83mm
Length: 6M,12M,5-7Mrandom length,According to customer requirements
Process: Cold drawn,cold rolled
Package: Woven bags
End: PE / BE
Compressed air as the driving force, the use of high-speed sand flow (glass sand) impact cleaning and roughening of the substrate surface of the process, usually after the polishing process, but also in the pickling of steel pipe surface defects after remediation.
The purpose of sandblasting is to realize product surface cleaning and change the surface roughness.
The media needed for sandblasting is required to have a good cutting effect.
Annealed : Annealing is a heat treatment process in which the properties of a material are changed by heating and cooling. In stainless steel pipe manufacturing process, annealing is usually used to eliminate stress, improve mechanical properties and improve machinability. annealed means that the pipe has been annealed, its grain structure can be rearranged, so that it has better physical properties and machinability.
Pickled: Pickling is the process of exposing a metal surface to an acidic solution to remove surface oxides, rust spots and other contaminants. Pickling of stainless steel pipe can restore its surface finish, improve its corrosion resistance, and provide good surface conditions for subsequent processing and use.Pickled means that the pipe has been pickled, and its surface has been cleaned and removed oxides and other impurities.
