 |
| Quantity: | |
|---|---|
C | Si | Mn | P | S | Cr | Ni | Mo | N | W | Cu | |
S32760 | 0.05 | 1.00 | 1.0 | 0.03 | 0.01 | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | 0.5-1.0 |
S32750 | 0.03 | 0.08 | 1.2 | 0.035 | 0.02 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 | |
2507 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 |
YS（Mpa） | TS(Mpa) | EL | HB | |
S32760 | ≥550 | ≥750 | ≥25 | ≤300 |
S32750 | ≥550 | ≥800 | ≥15 | ≤300 |
2507 | ≥550 | ≥800 | ≥15 | ≤300 |
Grade | S32750,2507,S32760 |
Standard | ASTM A790 |
Size | OD:13.7-457.2mm |
WT:2.11--23.83mm | |
Length:6M,12M,5-7Mrandom length,According to customer requirements | |
Process | Cold drawn,cold rolled |
Package | Woven bags for cabinets |
End | PE/BE |
NTD(Ultrasonic test, Eddy Current test)
Mechanical Test(Tension Test, Flaring Test, Flattening Test, Hardness Test, Hydraulic test)
Metal Test(Metallographic Analysis, Impact Test-High/low temperature)
Chemical Analysis(Photoelectric Emission Spectroscopic)
C | Si | Mn | P | S | Cr | Ni | Mo | N | W | Cu | |
S32760 | 0.05 | 1.00 | 1.0 | 0.03 | 0.01 | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | 0.5-1.0 |
S32750 | 0.03 | 0.08 | 1.2 | 0.035 | 0.02 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 | |
2507 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 |
YS（Mpa） | TS(Mpa) | EL | HB | |
S32760 | ≥550 | ≥750 | ≥25 | ≤300 |
S32750 | ≥550 | ≥800 | ≥15 | ≤300 |
2507 | ≥550 | ≥800 | ≥15 | ≤300 |
Grade | S32750,2507,S32760 |
Standard | ASTM A790 |
Size | OD:13.7-457.2mm |
WT:2.11--23.83mm | |
Length:6M,12M,5-7Mrandom length,According to customer requirements | |
Process | Cold drawn,cold rolled |
Package | Woven bags for cabinets |
End | PE/BE |
NTD(Ultrasonic test, Eddy Current test)
Mechanical Test(Tension Test, Flaring Test, Flattening Test, Hardness Test, Hydraulic test)
Metal Test(Metallographic Analysis, Impact Test-High/low temperature)
Chemical Analysis(Photoelectric Emission Spectroscopic)
